Sharing the diagram with the client
Give your client a link to their floor plan and single-line diagram, print the QR sticker for the distribution board and decide yourself when they see a new version.
Before you start
Sharing works with a link to volter.be. So make sure of three things:
- You are online. Otherwise the block says "Sharing needs an internet connection."
- You are signed in.
- You have an active subscription. You need it to turn sharing on, to update and to create a new link. Turning sharing off and printing a sticker of a link that is already on is always possible.
You cannot share a demo project.
Turning sharing on
- Click the Project tab at the top.
- Find the Share with the client block.
- Turn on Share via a link. Volter captures the diagrams and publishes them. That takes a moment.
- Below the switch is now the link, with "Published on" and the date and the time below it.
- Click Copy and paste the link into an email or a message to your client. With Open you see for yourself what your client sees.
Every project has its own link. Anyone who has the link can view the diagram. Search engines do not index the page.
In the library you recognise a shared project by the "Shared link active" mark on the card.
What your client sees
Your client opens the link in the browser of their phone, tablet or computer. They need no account and no app.
- At the top are your logo and your name, with the Call and Email buttons. A button is only there if you filled in that detail.
- The diagrams: with Site plan and Single-line diagram they switch between the two. The site plan has one sheet per floor, the single-line diagram one sheet per board. They choose the sheet with the buttons above it.
- Zooming in is done by pinching or double-tapping, or with the plus and minus buttons below the sheet.
- At the bottom it says "Updated on" with the date of the last publication.
Your client can only look. They cannot change anything and do not see your project itself, only the sheets you published.
The diagrams are in the language in which you used Volter when you published.
Updating changes
The link does not follow your project by itself. Your client sees the version you published last, until you update it. That way a diagram you are still working on never ends up with your client.
- Change your project as you like.
- Go to the Project tab. The Share with the client block now says "There are changes your client cannot see yet."
- Click Update. Volter publishes the new version on the same link.
The link and the QR sticker stay the same. You do not have to send or print anything again. The date next to "Published on" and on the page of your client changes along.
The message comes with every change to the project, also if you only change your installer details.
Printing the QR sticker
The sticker hangs in the distribution board. Anyone who scans it lands on the same page as with the link. Why that is useful is explained in Sharing the single-line diagram with a QR sticker.
- Turn sharing on, see Turning sharing on. The sticker only exists for a link that is on.
- In the Share with the client block, click Print QR sticker.
- Choose the format: A4 label sheet (70 x 37 mm), Brother QL (62 x 29 mm) or Dymo LabelWriter (89 x 36 mm).
- If you chose the A4 label sheet, click the label on the sheet where the sticker has to go. Below the sheet it says On label with the number. That way you keep using a sheet you already started.
- Click Create PDF and save the file. It is named like your project, with "sticker" after it.
- Print the PDF at actual size, without fitting to the page.
Saving works as with an ordinary PDF, see Saving.
The sticker shows the QR code, the title "Electrical diagram", your name and your phone number. The A4 label and the Dymo also show a line of explanation and your logo. The narrow Brother roll has no room for that.
The details on the sticker are those of the last publication. If your phone number changed, first click Update and then make the sticker.
Turning sharing off
- In the Share with the client block, turn off the Share via a link switch.
- Volter asks "Turn off sharing?". Click Turn off.
Anyone who uses the link or the sticker no longer sees the diagram. They read "This link has been turned off", with your name and the buttons to call or email you.
If you turn the switch back on later, the same link works again, and so does the sticker that already hangs in the board. Volter publishes the current version of your project at that moment.
Creating a new link
Do you want the old link to stop for good, for example because it ended up with the wrong person?
- In the Share with the client block, click Create new link.
- Confirm with Create new link.
The old link stops right away, also on a sticker that already hangs in a board. Anyone who opens it reads "This link does not exist (anymore)". Send the new link to your client and print a new sticker.
The new link shows the version that was already published. If you changed something in the meantime, also click Update.
Throwing away a shared project
A link never shows a project you threw away.
- To the trash: Volter asks "Move shared project to the trash?". If you click Move to trash, the link stops right away and the sticker no longer works. That also applies to a link you had turned off.
- Restoring from the trash: the project comes back, the link does not. If you turn sharing on again, you get a new link. Then also print a new sticker.
- A folder to the trash: the links of all shared projects in the folder stop, also if you restore the folder later.
- A project that is only on your device: after deleting it is gone for good, and the link and the sticker stop along with it.
Anyone who opens a stopped link reads "This link does not exist (anymore)".
Problems
The Share via a link switch is grey
Turning it on needs an active subscription. The block then says "Sharing and updating need an active subscription." The switch is also grey for a moment while Volter is publishing or making a PDF. Wait until that is done.
It says "Sign in to share."
Click Sign in in the message and sign in. The block then fetches the status of the link itself.
It says "A demo project cannot be shared."
You do not share a demo project. You turn sharing on in your own projects.
My client sees the old version
You have not published your changes yet. In the Share with the client block, click Update. Then ask your client to reload the page.
The Update or Create new link button is grey
Both need an active subscription. Without a subscription the link keeps working with the last published version, and you can still turn sharing off.
The project is too large to share
The published sheets together may not weigh more than 20 MB. Usually it is down to a heavy background image. Replace it with a smaller one and try again.
An export is already running
Volter captures the sheets for one thing at a time. Wait until the PDF is ready and then try again.
The link could not be copied
Select the link in the block and copy it by hand. Or click Open and copy the address from the browser.
I do not see Print QR sticker
The button is only there when sharing is on. Turn on Share via a link.
The sticker does not fit on the label
Print at actual size, at 100 percent, without "fit to page". Also check that you chose the right format. The A4 sheet has 24 labels of 70 x 37 mm, in 3 columns and 8 rows.
The sticker shows an old phone number or logo
The sticker uses the details of the last publication. Change your details in the Installer block, click Update and make the sticker again.
My client reads "This link has been turned off"
Sharing is off for this project. Turn Share via a link back on. The same link and sticker then work again.
My client reads "This link does not exist (anymore)"
The link was replaced with Create new link, or the project went to the trash. Also check that the link was copied completely. Send your client the link that is now in the Share with the client block.
My client reads "The diagram is temporarily unavailable"
That is an outage, the link itself is fine. A few minutes later it works again.
It says that a link in the trash still works
Volter could not stop the link when the project went to the trash, for example because you were offline. The library then says "The link of a project in the trash could not be stopped and still works." Click Try again as soon as you are online again.
Valid for Volter 1.2.0 · images from 11/15/2026