Skip to content

The open beta runs until 30 November. From 1 December Volter is paid, and accounts created before 1 December stay free until 31 December. See the prices

Garden and terrace

Draw the garden, the terrace, the driveway and the paths around the house, adjust their corners, and use the right socket outlets outdoors.

Opening Outdoor

In the tools on the left, click Outdoor, or press B. A small menu with two rows of tiles opens next to the button.

  • Under Type you choose what you draw: Garden, Terrace, Driveway or Path. The swatch shows the material a new outdoor area starts with: grass for a garden, tiles for a terrace, pavers for a driveway and gravel for a path.
  • Under Shape you choose how you draw: Rectangle, Freeform or Circle. A path has no shape: you always draw a path point by point.

Choosing a type leaves the menu open. Choosing a shape, or Path, closes it: the menu lies over your drawing. A tap next to it closes it too. If you drag on the plan straight away, you simply keep drawing.

Drawing a garden

How you draw depends on the shape:

  • Rectangle: drag from one corner to the other.
  • Circle: drag from the centre to the edge.
  • Freeform: click the corners one by one. Then click the first point again. When your mouse is on it, the point gets a ring: the next click closes the shape. A double-click also closes it.
  • Path: click the points and finish with a double-click. The path runs in a smooth curve through the points and is 100 cm wide.

A drawn outdoor area is not selected, just like a wall. Click it to change it, see Changing an outdoor area. While drawing, Backspace removes the last point. Escape starts over.

Changing an outdoor area

Click an outdoor area with Select. A bar appears where you clicked. Its title is the type: choose there whether a terrace becomes a driveway, or the other way round. On the computer that choice is the first line under More. A path stays a path. The bar also holds:

  • Name: such as "Back terrace". The name is shown on the plan and in the bill of materials.
  • Material: grass, tiles, wood, pavers, gravel or concrete.
  • Area: the eye shows or hides the area on the plan.
  • Width: the width of a path, in cm.

On the computer not everything is in the bar right away. What is not there, you find under More, together with Duplicate.

A selected outdoor area has handles on the corners, on the points of a path or on the edge of a circle. Drag a handle to change the shape. Drag the outdoor area itself to move it. To set a corner to an exact angle, you work on the corner point itself, see Adjusting a corner.

With Outdoor chosen, a click also selects an outdoor area:

  • with Rectangle or Circle, a click selects any outdoor area,
  • with Freeform or Path, a click only selects an outdoor area of the type you are drawing. On another outdoor area, the click sets a point.

If you drag from the selected outdoor area, you move it. If you drag anywhere else, you draw a new outdoor area.

Adjusting a corner

A terrace that is not square, or a path that turns at a certain angle, you set to size at the corner point. It works like entering an angle for walls.

First select the outdoor area or the path with Select. Then click one of its corner points. The Corner bar appears at the point, for a path the Path point bar. A circle has no corner points.

Two sides meet at the point. On the plan a padlock marks the side that stays put, and a rotation arrow the side that turns. The toggle Turn the other side instead swaps those roles.

  • Angle: the inside angle at this point, from 1 to 359 degrees. While you type, you already see the new shape on the plan. Enter applies it.
  • Or use the arrow keys in the field: one degree per step, fifteen with Shift.
  • Length: the length of the side that turns, up to the next point, in cm.
  • The bin Delete point removes the point. Delete does the same.

For a path, the angle is the one between the two segments. At the first or last point of a path only one segment arrives: there you only see Length.

Escape in a field puts the old value back. Every change is one step in Undo. Dragging a corner point keeps working as before.

With a finger you tap the point. The bar is then finger-sized. If the Outdoor layer is locked or hidden, you cannot select a corner point.

Overlapping outdoor areas

Outdoor areas may overlap. Draw the garden around the house first, then the terrace, the driveway and the paths on top of it. The garden always stays at the bottom, so a terrace on the grass stays visible.

The garden does not continue inside a room. So feel free to draw the garden around the whole house: where there is a room, you see no grass.

The Outdoor layer

All outdoor areas are on the Outdoor layer. You find it in Layers, at the bottom right of the floor plan.

  • Hide: you only see the house, without garden and terrace.
  • Lock: the outdoor areas stay visible, but you cannot select or drag them. Useful when you put a light or a socket outlet on the terrace: you drag the light, not the terrace.

See Using layers.

Socket outlets outdoors

Under the AREI, outdoors is a damp location. A socket outlet on a garden, terrace, driveway or path must therefore be waterproof. Choose Waterproof outlet when you place it. A normal socket outlet outdoors gives a warning in the AREI check.

In the bill of materials, the devices outdoors are listed per outdoor area, under its name. That way you see what goes on the terrace and what goes in the garden.

In a black and white PDF, the outdoor areas are light grey and the garden is a dashed line.

Problems

I get a warning for a socket outlet on my terrace

Under the AREI, outdoors counts as a damp location, at least AD2. It needs a waterproof socket outlet. Click the socket outlet and choose Waterproof outlet in the title of the bar. On the computer that choice is the first line under More. The circuit stays. If the terrace has a roof and you draw it as a room, turn on Damp room for that room.

A socket outlet indoors gets the outdoor warning

The socket outlet is not in a room, but it is on the garden. Assign the space as a room, then the socket outlet counts as indoors. See Assigning rooms.

A click sets a point instead of selecting an outdoor area

With Freeform or Path, a click only selects an outdoor area of the type you are drawing. So a click on the garden with Terrace chosen sets a point, which lets you draw a terrace on the garden. Press Escape to remove the point. Then choose the right type in the Outdoor menu, or click the outdoor area with Select.

I see grass inside my house

No room has been assigned there yet. Where there is a room, Volter shows no garden. Assign the space with Assign room, see Assigning rooms.

My freeform does not close

Click exactly on the first point, until you see the ring. Or double-click the last point. A freeform needs at least three points.

The menu closes as soon as you choose a shape or Path. Click Outdoor again to choose another type or shape.

The tool draws nothing and says "is hidden"

The Outdoor layer is hidden or locked. See Using layers.

I cannot enter an angle on my circle

A circle has no corner points. Draw the outdoor area as a Freeform if you need corners.

A click on a corner point does not select the point

First select the outdoor area or the path itself, then click the point. If you are still drawing with Outdoor, every click sets a new point: press Escape first. If it still does not work, the Outdoor layer is locked or hidden.

Volter does not accept my angle or length

The bar says why:

  • "Enter an angle between 1 and 359 degrees."
  • "A side would become shorter than 10 cm."
  • "The area would cross itself." or "The path would cross itself."

Try another angle, or use the toggle to turn the other side.

The wrong side turns

Click the toggle Turn the other side instead. The padlock and the rotation arrow swap sides.

I cannot delete a corner point

An outdoor area keeps at least three points and a path at least two. Would you rather delete the whole outdoor area? Select it and click Delete.

Valid for Volter 1.0.0 · images from 11/10/2026