Solar panels and home battery
Draw solar panels, an inverter and a home battery, fill in their details for the inspection report, and see how they appear on the single-line diagram.
What you need
Everything is under Place symbol, in the Solar panels and batteries group:
- Solar panel: one symbol for a string of panels, with the number next to it.
- Inverter DC / AC or Inverter AC / DC: choose the type that matches your device.
- Battery: the home battery, with the number of modules next to it.
Put the inverter on a circuit with its own circuit breaker. Connect the panels and the battery to the inverter: they then get the same circuit automatically.
Panels and inverter
- Place the inverter and put it on its circuit, with Assign circuit or in the bar under Circuit.
- Place one solar panel per string. In the bar, set Quantity to the number of panels in the string.
- Connect each string to the inverter with Draw connection.
If the panels are on the roof and the inverter hangs in the attic, connect them across floors. See Connecting to another floor.
A home battery
- Choose Battery in the Solar panels and batteries group and click on the plan.
- Connect the battery to the inverter with Draw connection.
If your battery has a built-in inverter, don't connect it to anything. It then sits as an ordinary point on its own circuit.
Details for the inspection report
The inspection report asks for the number and power of the panels, and the type, serial number and maximum power of the inverter. Select the symbol and fill in the bar:
- Solar panel: Quantity and Peak power, and under More Type, Cells and Cell type.
- Inverter: Maximum and Nominal in kW, and under More Make and model and Serial number. In the title of the bar you switch between DC / AC and AC / DC.
- Battery: Capacity per module in kWh and the battery Voltage in V, and under More the Quantity of modules, Type and Serial number.
On the computer only Circuit is in the bar right away. You find the other fields there under More.
On the single-line diagram
The inverter sits on its circuit, with its maximum and nominal power next to it. Above it, a line runs to the battery and to each string of panels. The battery shows its total capacity, such as 4 × 2.56 kWh = 10.24 kWh, and each string shows the number of panels with their details.
Problems
I get a warning about peak power or maximum power
The field is still empty. Select the panel or the inverter and fill in Peak power or Maximum.
The battery doesn't sit with the inverter on the single-line diagram
It isn't connected to the inverter. Draw a connection between the two.
I don't know which inverter to choose
Choose the type shown on your device. Volter doesn't check that choice, because only you know the device. You can still switch it later in the title of the bar. On the computer that is the first line under More.
My panels have no circuit letter
That's right. They get the circuit of the inverter, but no letter or number of their own.
I get a warning about 10 kVA
The inverters together deliver more than 10 kVA. Check that the maximum power of each inverter is correct.
Valid for Volter 1.0.0 · images from 11/10/2026