Skip to content

The open beta runs until 30 November. From 1 December Volter is paid, and accounts created before 1 December stay free until 31 December. See the prices

Assigning circuits

Put the devices on your plan on their circuit, so Volter can draw the single-line diagram and check the AREI rules.

Where circuits come from

A circuit is a circuit breaker in your distribution board, or an output of a home automation module. So you create circuits in the Distribution board tab, not on the plan. If you have no circuits yet, the Circuits list shows the Set up distribution board button.

Volter gives every circuit a letter, in the order of the rail: A, B, C. On a sub-board the board code comes first, such as T-A. Move breakers around in the distribution board and the letters move along, and Volter tells you which letters changed.

A breaker with an RCD or another breaker behind it feeds other circuits and is not a circuit itself.

Steps

  1. On the floor plan, choose Assign circuit in the tools on the left, or press Y. The Circuits list opens next to the tools.
  2. In the Circuits list, click the circuit you want to assign. The row lights up in the colour of the circuit.
  3. Click the devices that go on it. They take on the colour of the circuit.
  4. Click a device again to take it off the circuit.

Devices that are connected to each other always go along together. See Connecting symbols.

Seeing what has no circuit yet

While Assign circuit is active:

  • Devices without a circuit have a dashed ring.
  • The row below the tabs shows how many are still without a circuit on this floor, and on which other floors.

Want to see the circuit colours with other tools too? Turn on Circuit colour in View at the bottom right.

On the single-line diagram and the distribution board, the row below the tabs shows Assign symbols, with the number of devices without a circuit. That button jumps to the first floor with devices that have no circuit.

Several devices at once

Select the devices with Select. In the bar that appears, choose a circuit under Circuit. Unassigned takes them off their circuit. If the selected devices have different circuits, it says Mixed.

That field only appears when you select nothing but devices. If a wall, a data or a coax outlet is in the selection, it disappears.

Giving a circuit another colour

In the Circuits list, click the coloured dot of a circuit. Choose one of the ten colours, or a colour of your own. Volter warns you when a colour is hard to read on a dark or light background.

Adding devices from the single-line diagram

On the single-line diagram, choose Place symbol and a symbol. Plus signs appear: above every circuit for a new branch, and after every branch to add the device to it. The device gets that circuit right away and goes into the To be placed list. You put it on the plan later.

What the AREI check looks at

As soon as devices are on a circuit, Volter checks, among other things:

  • Socket outlets on at least 2.5 mm².
  • At most 8 socket outlets per circuit.
  • Oven, hob, washing machine, dryer, dishwasher and EV charging station each on a circuit of their own.
  • Fixed heating only together with other heating.
  • At least two lighting circuits in a home with more than two rooms.
  • A 30 mA RCD where one is required.

Devices without a circuit appear as a warning in the AREI check list.

Problems

I cannot find a button to add a circuit

You create circuits in the Distribution board tab: add a circuit breaker on the rail. It then appears in the Circuits list.

A click on a device does nothing

First choose a circuit in the Circuits list. If it still does not work:

  • A data or coax outlet does not need to be on the single-line diagram, so it gets no circuit.
  • The layer of the device is hidden or locked. See Using layers.

I clicked a device and it lost its circuit

A second click with the same circuit takes the device off it. Click again to put it back.

The devices next to it changed too

They are connected to the device you clicked. Connected devices always share their circuit.

The letter of my circuit has changed

The letters follow the order of the rail. After you move, add or delete a breaker, they move along. Volter shows this briefly at the bottom, with Undo.

The name of my circuit does not match its letter

A new breaker is called "Circuit" with a number by default, separate from its letter. Give it a name of its own in the distribution board, under Name.

I deleted a breaker and my devices no longer have a circuit

Devices of a deleted breaker lose their circuit. Use Undo if that was not what you meant.

A breaker is no longer in the list

There is an RCD or another breaker behind it. It then feeds other circuits and is no longer a circuit itself.

Assign circuit is not on the single-line diagram

You assign on the floor plan. On the single-line diagram you use Assign symbols in the row below the tabs, or the circuit in the bar when you select symbols.

Valid for Volter 1.0.0 · images from 11/10/2026