Skip to content

The open beta runs until 30 November. From 1 December Volter is paid, and accounts created before 1 December stay free until 31 December. See the prices

Importing a plan

Put the architect's plan under your floor plan as a PDF, DXF or image, and set it to scale.

Importing a plan

Open the floor plan and choose the floor. Click Background in the row below the tabs and choose the kind of plan you have:

  • Import PDF as background...
  • Import DXF Background..., see Importing a DXF.
  • Import image background...: a PNG, JPG or WebP.

If a PDF has more than one page, Choose a page opens. Click the page with the plan. The magnifier shows it larger. Then click Import. A one-page PDF comes in straight away.

The plan lands at the top left of the canvas, at an opacity of 50%. It is not to scale yet: do that right away, see Setting the scale.

Every floor has its own background. If you import on a floor that already has a plan, Volter first asks whether you want to replace it.

Setting the scale

A PDF or image does not know how big the house is. Set the plan to scale with a distance you know:

  1. Click Background and choose Calibrate scale.... Right-clicking the plan works too, or a long press on a tablet. A Calibrate scale card appears with the steps.
  2. Click two points whose real distance you know: the ends of a dimension line on the plan, or a door opening of 93 cm.
  3. Fill in the Real distance in whole centimetres and click Calibrate.

The first point stays put and the plan grows or shrinks around it. Pick a long distance, such as the dimension of a whole facade: a small misclick then matters less.

Cancel or Escape stops without changing anything. You can calibrate as often as you like, and you can undo every calibration.

Moving and resizing

Choose Adjust background in the Background menu or after right-clicking the plan. The plan gets a dashed border:

  • Drag the plan to move it, for example so a wall lines up with a wall you drew.
  • In the bar at the bottom of the plan you set the Scale and the Opacity.

Click next to it or press Escape to stop. Calibrating is more precise than the Scale slider.

Opacity

With Opacity you make the plan stronger or fainter, from 10% to 100%. The lower, the fainter: your own walls and symbols then stand out more. You find the slider at the top of the Background menu, after right-clicking the plan, and in the bar at the bottom of the plan with Adjust background.

Importing a DXF

A DXF comes in differently from a PDF or image:

  • Volter only reads an ASCII DXF. Save the plan as ASCII DXF in your CAD program.
  • Volter reads a DXF in metres, so a plan drawn in metres comes in at the right size straight away.
  • Lines, arcs, circles, text and blocks come along, from every layer in the file.
  • A DXF cannot be moved, resized or calibrated, and it has no opacity setting.

Hiding, exporting and removing

The plan sits on the Background layer, in Layers at the bottom right of the floor plan:

  • Hide: you briefly see only your own drawing.
  • Lock: the plan stays visible, but a click or drag no longer touches it. Handy while you place symbols.

See Using layers.

A PDF or image includes the plan by default. Untick Background under Layers on the Export tab if you do not want it, see Exporting a PDF. The page you share with your client always shows the plan.

Done with it? Choose Remove background in the Background menu. Volter asks first, and you can undo it.

Problems

The plan is far too big or too small

An imported PDF or image is not to scale yet. Calibrate the plan on a dimension you know, see Setting the scale.

My DXF will not load

You get the message that the file could not be read as a DXF background. Save the plan as ASCII DXF in your CAD program and import it again. The same message also appears when the file holds no lines, arcs or text.

My DXF comes in far too big

Volter reads a DXF in metres. If the plan was drawn in millimetres, it comes in a thousand times too big. Convert the plan to metres in your CAD program and export it again. Or export the plan as a PDF and calibrate it in Volter.

The plan is blurry

Volter draws a PDF page with its long side at 8000 pixels. On a large sheet with many plans side by side, little detail is left per plan. Save only the floor you need as a separate page and import that.

I cannot find the Background button

The button is in the row below the tabs of the floor plan, next to the floor. You do not see it while you place symbols, draw connections or draw outdoor areas. Press Escape or choose Select.

I cannot drag the plan

Choose Adjust background first. If it still does not work, the Background layer is locked, see Using layers. A DXF cannot be dragged.

The project is too large to share or export

A heavy image as background makes the project large. Make the image smaller, or import only the page with the plan, and try again.

Valid for Volter 1.0.0 · images from 11/10/2026